This will allow you to quickly test and verify each interface. enabled crestron connected on display, from service mode, set the IP of the controller, left default port on 41794, ip id 06 (so no hex to deci issues) - added a crestron controlled display / roomview display in my simpl program, set ip to 127.0.0.1, id 06 In my IP table it shows as offline, no matter what I do. The user interface provides controls based on the interfaces found in the SDK. The following sections describe how to use the XPanel user interface to test device drivers.

Enter 41794 in the Port field if this value is not already present.

Enter 03 in the IPID field if this value is not already present.

Enter the IP address of the control system in the Hostname/IP Address field.

Set Connection SettingsĬonnection settings for the control system must be set in XPanel prior to testing the driver: If testing a driver for the first time, install XPanel by launching the CrestronXPanel installer.exe installer, and then open the rad_sdk_test_xpanel_.c3p file. NOTE: For Crestron Virtual Control (VC-4) installations, the. AV Framework software, or XiO Cloud, the appropriate ports must be opened on the Linux server. In the Test Files folder of the SDK package, there is a folder labeled “User Interface”. Opened External Server Ports Opened Internal Server Ports For any outbound connections made from the Crestron Virtual Control server, such as connections to Crestron Fusion software. It is a Windows® OS based application that emulates a Crestron touch screen. Via the control systems Control Subnet port, an installer may simply. The supplied interface for testing the driver is the Crestron XPanel touch panel emulator. Supports Core 3 UI XPanel web-based remote control. Once the control system is configured with the test program and driver DLL files, you can begin to test drivers.

Crestron xpanel port